EVA400 Plastic Grinding Mill
EVA material is first made into insoles after foaming, and the EVA
is grinded into powder, and then produced, it is necessary to use
EVA400 mill produced by our company.
EVA400 grinding machine is also widely used, not only can grind
EVA, but also to PE, PET, ABS and other materials grinding. Why buy
EVA400 flour mill?
1, EVA400 mill speed is the most suitable for EVA work, it can
ensure EVA discharge.
2, because most of the material is the data after foaming, so the
small proportion, EVA grinding function of material grinding more
fine.
3, the machine is equipped with dust removal system, the effect is
excellent, dust and pollution will not occur.
4, adequate equipment materials, reasonable program, useful to
reduce noise.
No need to buy the machine customers are able to find us, we have
various types of milling machines, all kinds of material we can
handle, just trust me you give me this opportunity, Yiming
machinery will be your good helper material milling doubt.
Feature
1,Compared with other pulverizers, the capacity is 20-50 percent
increased with same power and the energy is saved.
2,Install the dust collection device, reduce the dust pollution
effectively.
3,The labor is reduced with fan discharge.
4,The door of main machine can be opened which is convenient to
maintain and replace blades.
5,Adopt double cold(water and fan),the inner temperature of body is
decreased and the material pulverized is not distortional. t is
beneficial to pulverize the thermo-sensitive plastic, for example
PVC,PE,PET,LDPE,PS,EPS,XPS,ABS,EVA,PPC.
Usage
1,With water spray cooling system. it is suitable for processing of
thermal sensitive material. With unique water spray cooling system.
When the temperature of main machine is higher than setting
temperature, water spray automatically until the temperature
decreased normally.
Note: less of water spray into to machine will be dryed quickly
which will not affect material properties. It can be installed by
your requirements.
2,The raw material become power by vibration principle of
ultrasonic vortex wave pressure which is from the high speed
rotating of main shaft.
The material is conveyed to screening system by wind conveying. The
coarse materal is back to the milling chamber automatically, then
pulverized again.
3,The blade adopt high quality steel which is treated by
heating.after heat treatment, with good abrasion resistance. It is
suitable for continuous running.
4,This size of machine is small with compact structure, fully
sealed, no dust overflow.
5,The material is transferred based on own wind pressure.
Technical Specification
| Type | YMMF-400 |
| Electricity | 380V/3PHASE/50HZ |
| Power | Main motor | 22kw |
| Fan | 4kw |
| Main motor | Rotating motor | Φ410mm |
| Fixed blade | Φ410mm |
| Feeding | automatic | vibration |
| Colling mode | water | AIR-cooled |
| Rotating speed | minute | 3900rpm |
| Capacity | H | 50-120KG |
Electrical Equopment
Shaft | contactor1 | delixi | CJX-2-100 220V |
| contactor2 | delixi | CJX-2-150 220V |
| SKF | 6312 |
| Dusting | bag |
Protection equipment | High and low voltage protection Overload protection Suction device Dust collecting bag protection with 9 bags |
